Skip to content
PDF

Upgrading Module Suite

This guide covers the step-by-step procedure to perform an upgrade of a Module Suite installation.

Check prerequisites

The guide assumes that the prerequisites to perform the upgrade operation are met. If that is not the case, please go back to the Upgrade overview.

Deploy the new Modules on the target system

During this phase, the updated Module binaries will be deployed on the target system. The steps to perform for the deployment are exactly the same as the ones covered during a clean installation. Depending on the target platform, refer to one of the following resources:

Perform the Module upgrade

This phase is roughly equivalent to the Module installation phase performed upon initial Module Suite installation. The difference is that the system will already include an older version of the Modules, which will have to be replaced.

In order to proceed with the upgrade of the modules, please follow these steps:

  • Start the Content Server services

  • Login as Administrator and access the Module administration panel

  • Access the Content Server Admin pages > Core System - Module Configuration > Upgrade Modules

  • From the available modules, select “AnswerModules Content Script x.y.z”

  • Follow the installation steps, but do not restart Content Server when prompted.

  • Access the Content Server Admin pages > Core System - Module Configuration > Upgrade Modules

  • From the available modules, select “Answer Modules - Beautiful Web Forms x.y.z”

  • Follow the installation steps, but do not restart Content Server when prompted.

  • Access the Content Server Admin pages > Core System - Module Configuration > Upgrade Modules

  • From the available modules, select “Answer Modules - Smart Pages x.y.z”

  • Follow the installation steps, but do not restart Content Server when prompted.

  • At this point, the upgraded Modules have been installed in the Content Server system and have replaced the older versions.

Apply the available hotfixes

  • Stop Content Server

  • Apply relevant hot fixes

  • Start Content Server

Activate the software

  • Activate the software by applying the new software activation key. Depending on the format in which the key was provided, you can use one of the following approaches:

  • If you plan to apply the license key manually, please proceed to Activation through manual key setup.

  • Alternatively, if you plan to import the licensing configuration settings, please proceed to the Activation through key import.

Update the Module Suite Configuration

Using the Content Script Volume Import Tool, check for the presence of updates or conflicts in the System library.

  • As the system Admin user, open the Content Server Administration pages.

  • Locate the AnswerModules Administration section. Within this section, open the Content Script Volume Import tool.

    Base Configuration

  • Within the Content Script Volume Import page, locate the Library Update section (it can be found at the very top of the page).

    Click the Import button.

    Library Update

    What if the Library Update section is not present?

    The Library Update section at the top of the import tool will only show up if there are updates to be applied to the System libraries.

    If none are present, this section will not be found and the step can be skipped.

  • Wait for the import operation to complete.

    Import operation

  • Once the operation is complete, a success message will be shown.

    Library update complete

    Upon refreshing the page, the Library Update section will no longer be visible. This indicates that all relevant libraries have been imported.

  • Within the Content Script Volume Import page, locate the Volume's Conflicts Resolution section. The section may take some time to process the status of the Volume. In this case, it will show as loading.

    Conflicts loading

  • Check for any outstanding conflicts and optional updates and update as needed.

    Refer to the Content Script Volume Import Tool for further details on conflicts and conflict resolution.

    Conflicts check

    Custom changes to library components

    In case any of the standard components were customized, patched or otherwise modified, or new custom components were added within the standard library, make sure that you transfer any relevant changes to the new libraries before deleting the old version.

    What do I need to upgrade ?

    How the library upgrade works

    The 'Upgrade' operation will rename the existing library folders in the Content Script volume, and import a new version of the same (the only exception is the 'CSFormTemplates' folder, which will be discussed later). As such, any modification that has been applied to one of the libraries will be relocated and no longer available.

    Examples include:

    • any custom Beautiful WebForms components added to the CSFormSnippets folder
    • any custom Rest API endpoints added to the CSServices folders
    • any callbacks configured in the CSEvents or CSSynchEvents folders
    • any Classic UI modifications applied through the CSMenu, CSAddItems, CSBrowseView, CSBrowseViewColumns
    • any other object created or modified within one of the upgraded folders

    As part of the upgrade operation, you should identify such changes and make sure they are ported to the new libraries.

    CSFormTemplates have a slightly different upgrade process. Since objects in this folder are referenced by object DataID (their unique identifier on OTCS)they can't be replaced with the updated version, since this would potentially cause issues in any existing form using the template. For this reason, the upgrade process for CSFormTemplates automatically updates each single template by adding a new version to the object, thus preserving the original DataID. For this reason, no "backup" folder will be found for CSFormTemplates..

  • Cleanup. The folders named “Backup-_yyyyMMdd-AAAAAA” are backup folders containing the previously installed library scripts/snippets. They can be safely exported and removed